Water Base Cleaner and Deoxidizer
Poly Bio-Kleen is a blend of wetting agents, emulsifiers, mild acids and surfactant. Directed at cleaning and deoxidizing a wide variety of metals including copper, copper alloys, aluminum, zinc, nickel and stainless steel.
Poly Bio-Kleen may be used as single step cleaner and activator prior to electroplating.
Clean in Poly Bio-Kleen Concentration: 1% to 100% by volume as necessary.
Temperature: ambient to 140 degrees F
Rinse thoroughly with water.
Note: The exact time, concentration and temperature will depend upon the nature of the soil, oil and the amount of oxide to be removed. Equipment: Tanks and wetted surfaces should be PVC or polypropylene.
- Eliminates use of heaters since you can use Poly Bio-Kleen at room temperature.
- The wetting agents and surfactants, allow for quick removal of oxides without attacking the base metal.
- The buffered pH control gives Poly Bio-Kleen the ability to go to work faster and last longer.
- Broad range of applications.
- Formulated to meet waste water management control requirements.
Appearance: Clear pH: 2.0 – 2.5 Odor: Mild Biodegradable: Yes Container packaging: 5 gallons (18.9 liters) or 55 gallons (189.0 liters)
Poly Bio-Kleen is a mildly acidic industrial compound. Direct contact may cause irritation or burning of eyes and irritation of the skin. It is harmful if swallowed or inhaled.
Avoid contact with eyes, skin and clothing. Wear rubber gloves, safety goggles or face shield, and suitable protective clothing when handling the concentrate or solutions. Wash thoroughly after handling. Avoid breathing mist. Use with adequate ventilation. Do not take internally.
Immediately flush eyes or skin with plenty of water for at least 15 min. For eyes, get medical attention. Remove contaminated clothing and shoes. Wash them before re-use.
If swallowed, wash out mouth thoroughly with water. Drink several glasses of water or milk. Follow with milk of magnesia. Seek immediate medical attention (911).